![]() Next I will create a Box 40mm X 3mm X 40mm for the undercut and add 8mm fillets. Next I will need to create two cylinders at the center of the vertical boss, one 18mm Dia X 5.68mm deep and one 9mm Dia X 10mm deep. To start I will activate the layer for the primitive negative bodies and create two cylinders offset from the corners by 15mm from the outside edge and 10mm from the top edge of the base. Now I will begin to create the primitive solids used for the cuts. Next I will move it to the Combined solids layer by activating the layer and moving the body to it. Now after selecting the three solids and completing the command, if I hover over the solid it looks like this. It’s time now to combine the three solids into a single 3D shape. Here are the separate rendered solids (there are three). Next I will create the last of the positive primitive shapes by adding a cylinder at the midpoint of the edge of the vertical rectangle. This will be the rectangular portion of the vertical tombstone shape. Next I will create another box 40mm x 10mm x 30mm located on the front face of the base body at 0, 30, 0. ![]() I will use the Fillet tool to create 8mm fillets on the cornersĬhanging the render to wireframe makes it easier to collect the edges. ![]() Next I will create a Box, 40mm X 150mm x 10mm with the bottom left corner on the Origin. I will start by setting up the layers to organize my 3D shapes. Here is a drawing of the part I will be creating: In an earlier blog - Introduction to Basic 3D Shapes in DraftSight - I demonstrated the methods for creating the basic 3D shapes using DraftSight Premium or DraftSight Enterprise Plus.įor this demonstration I will be using the basic 3D shapes from the 3D Modeling Workspace to create over-lapping solids, which I will combine or subtract to achieve the desired shape. This method may be used with any version of DraftSight. Then using the Extrude command to create a solid body. This revolutionizes the way organizations conceive, develop and realize new products, delivering competitive edge through innovative customer experiences.In my last blog - Using Sketched Contours to Create 3D Extrusion in DraftSight - I demonstrated a method for creating a closed contour with a polyline or with sketch entities and the Weld command. This enables multiple disciplines to leverage powerful and integrated specialist applications across all phases of the product development process.ĬATIA’s Design, Engineering, Systems Engineering and Construction applications are the heart of Industry Solution Experiences from Dassault Systèmes to address specific industry needs. An Inclusive product development platform that is easily integrated with existing processes & tools.An Instinctive 3DEXPERIENCE, for both experienced and occasional users with world-class 3D modeling and simulation capabilities that optimize the effectiveness of every user.A Social design environment built on a single source of truth and accessed through powerful 3D dashboards that drive business intelligence, real-time concurrent design and collaboration across all stakeholders including mobile workers. ![]() Systems architects, engineers, designers, construction professionals and all contributors can define, imagine and shape the connected world.ĬATIA, powered by Dassault Systèmes’ 3DEXPERIENCE platform, delivers: CATIA delivers the unique ability not only to model any product, but to do so in the context of its real-life behavior: design in the age of experience.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |